In order to disassemble the 3D manual clutch, a quality set of retaining ring pliers is required to remove the 1" heavy duty external retaining ring from the shaft of the clutch driver. If you don't want the snap ring ring flying across the garage as you attempt to pry it off with a screwdriver, we highly recommend purchasing this tool!
- Capacity 1/4-Inch to 2-Inch external, 3/8-Inch to 2-Inch internal
- Includes tips: .036, .047, .070 straight. .036, .047 90°
- Converts from internal to external rings with a simple switch of the red tab
- Heavy duty return spring
- Heat treated for longer life